6 Coordinate Systems
Allows up to 6 jobs to be run consecutively in a single set up
3 Step Control of EDM Parameters
Program up to three EDM parameter settings per hole to improve hole quality on difficult
entrance and exits
Automatic Electrode Changer
Allows for a large volume of unattended operation
Automatic Electrode Stabilizer
Moves automatically to provide extra support for long electrodes
1000 RPM Programmable Spindle
Rotation speed is adjustable and will reduce cycle time for some applications
Windows Based
With conversational G and M Code programming
Multi-Tasking Abilities
Create and edit one program while the machine is running another
Ethernet Connectivity and USB Support
For programming and transferring of data
Automatic Depth Control
Generate blind holes reliably without operator intervention
Linear Glass Scales with 1 Micron Resolution
Provides true, closed loop, position feedback for precise part positioning accuracy
Auxiliary I/O
Ability to interface with ancillary devices such as rotary tables, indexers, and work piece
handling systems
Integrated Rotary and Tilt/Rotary Tables (optional)
Programmable tilt and rotary systems for complex parts requiring multi axis positioning
Break Through Detection (optional)
Ensures a complete hole or helps to eliminate back wall strikes
Optical Inspection System (optional)
High resolution video camera can measure hole size, verify position, and locate datum
points for part programs
EDM Power Booster (optional)
Increases the maximum average current which will reduce the cycle time when using larger
diameter electrodes
EDM Milling (optional)
EDM mill shaped diffuser holes using standard cylindrical electrodes
6 Point Probing (optional)
Probe the work piece to determine its 5 axis location and offset position in the part program
Coaxial Flush (optional)
A special guide and guide sleeve delivers auxiliary flush down the guide body
Programmable High Pressure Flush (optional)
Adjust the high pressure flush pressure through the electrode with a G-Code in the part program
| TRAVEL | |
| X Axis | 23.6″ (600 mm) |
| Y Axis | 15.7″ (400 mm) |
| W Axis | 13.5″ (345 mm) |
| Z Axis | 15.7″ (400 mm) 23.6″ (600 mm)•• |
| Open Height | |
| Minimum | 0.5″ (15mm) |
| Maximum | 14.1″ (360mm) |
| Open Height to TILT ROTARY TABLE *** | |
| Minimum | – |
| Maximum | – |
| WORK TABLE | |
| Width x Depth | 31.4″ x 19.6″ (800 x 500 mm) |
| WORK TANK | |
| Width x Depth x Height | 43.8″ x 27.3″ x 5.9″ (1,115 x 695 x 150 mm) |
| WEIGHT CAPACITY | |
| On Work Table | 1,750 lb. (795 kg.) |
| On Tilt Rotary | – |
| GENERATOR | |
| Maximum Average Current | 30A, 60A** |
| On and Off Time | 1 to 99 μs |
| Capacitors | 0 to 1.81 μF |
| AUTOMATIC ELECTRODE AND GUIDE CHANGER | |
| AEC Positions | 20**, 30** |
| AGC Positions | 12** |
| FLOOR SPACE AND WEIGHT | |
| Width x Depth x Height | 93″ x 71″ x 92″ (236 cm x 180 cm x 235 cm) |
| Machine Tool Weight | 3,190 lb. (1,450 kg.) |
| ENVIRONMENTAL | |
| Room Temperature | 68 to 77°F (20 to 25°C) |
| Relative Humidity | 40%to 55% |
| UTILITIES | |
| Electrical | 220VAC ±10%, 3 PHASE, 60 Hz, 3.5 KVA |
| Air | 90 PSI@ 1 CFM (6 BAR@ 1.7 CMH) |
| TRAVEL | |
| X Axis | 23.6″ (600 mm) |
| Y Axis | 15.7″ (400 mm) |
| W Axis | 19.6″ (500 mm) |
| Z Axis | 15.7″ (400 mm) 23.6″ (600 mm)•• |
| Open Height | |
| Minimum | 6.3″ (160mm) |
| Maximum | 26.0″ (660mm) |
| Open Height to TILT ROTARY TABLE *** | |
| Minimum | – |
| Maximum | – |
| WORK TABLE | |
| Width x Depth | 31.4″ x 19.6″ (800 x 500 mm) |
| WORK TANK | |
| Width x Depth x Height | 43.8″ x 27.3″ x 5.9″ (1,115 x 695 x 150 mm) |
| WEIGHT CAPACITY | |
| On Work Table | 1,750 lb. (795 kg.) |
| On Tilt Rotary | – |
| GENERATOR | |
| Maximum Average Current | 30A, 60A** |
| On and Off Time | 1 to 99 μs |
| Capacitors | 0 to 1.81 μF |
| AUTOMATIC ELECTRODE AND GUIDE CHANGER | |
| AEC Positions | 20**, 30** |
| AGC Positions | 12** |
| FLOOR SPACE AND WEIGHT | |
| Width x Depth x Height | 93″ x 71″ x 104″ (236 cm x 180 cm x 264 cm) |
| Machine Tool Weight | 4,035 lb. (1,830 kg.) |
| ENVIRONMENTAL | |
| Room Temperature | 68 to 77°F (20 to 25°C) |
| Relative Humidity | 40% to 55% |
| UTILITIES | |
| Electrical | 220VAC ±10%, 3 PHASE, 60 Hz, 3.5 KVA |
| Air | 90 PSI@ 1 CFM (6 BAR@ 1.7 CMH) |
| TRAVEL | |
| X Axis | 23.6″ (600 mm) |
| Y Axis | 15.7″ (400 mm) |
| W Axis | 19.6″ (500 mm) |
| Z Axis | 15.7″ (400 mm) 23.6″ (600 mm)•• |
| Open Height | |
| Minimum | 6.3″ (160mm) |
| Maximum | 26.0″ (660mm) |
| Open Height to TILT ROTARY TABLE *** | |
| Minimum | 0.0″ {0mm) |
| Maximum | 18.7″ (475 mm) |
| WORK TABLE | |
| Width x Depth | 31.4″ x 19.6″ (800 x 500 mm) |
| WORK TANK | |
| Width x Depth x Height | 43.8″ x 27.3″ x 5.9″ (1,115 x 695 x 150 mm) |
| WEIGHT CAPACITY | |
| On Work Table | 1,750 lb. (795 kg.) |
| On Tilt Rotary | 60 lb. (27 kg.) |
| GENERATOR | |
| Maximum Average Current | 30A, 60A** |
| On and Off Time | 1 to 99 μs |
| Capacitors | 0 to 1.81 μF |
| AUTOMATIC ELECTRODE AND GUIDE CHANGER | |
| AEC Positions | 20**, 30** |
| AGC Positions | 12** |
| FLOOR SPACE AND WEIGHT | |
| Width x Depth x Height | 93″ x 71″ x 104″ (236 cm x 180 cm x 264 cm) |
| Machine Tool Weight | 4,435 lb. (2,010 kg.) |
| ENVIRONMENTAL | |
| Room Temperature | 68 to 77°F (20 to 25°C) |
| Relative Humidity | 40% to 55% |
| UTILITIES | |
| Electrical | 220VAC ±10%, 3 PHASE, 60 Hz, 3.5 KVA |
| Air | 90 PSI@ 1 CFM (6 BAR@ 1.7 CMH) |
SY-4060R Small Hole EDM Drill with Fanuc LRMate Robot and Fanuc Vision
SY-4060R Small Hole EDM Drill with Fanuc LRMate Robot and Fanuc Vision with Tool Bank
Programmable flush pressure