Belmont SY-3030T CNC High Speed EDM Drills

Machine Demonstration:
Features a compact footprint, which maximizes floor space with its “paint to paint” design. The work tank can fill up to 11.8” high, which allows for submersible applications. This EDM drill is perfect for a multiple machine cell utilizing three to five axis machining.

Compact Footprint
Maximizes floor space with its compact footprint, which allows for close proximity of multiple machine setups

6 Coordinate Systems
Allows up to 6 jobs to be run consecutively in a single setup

3 Step Control of EDM Parameters
Program up to three EDM parameter settings per hole to improve hole quality on difficult entrance and exits

Automatic Electrode Stabilizer
Moves automatically to provide extra support for long electrodes

1000 RPM Programmable Spindle
Rotation speed is adjustable and will reduce cycle time for some applications

Windows Based
With conversational G and M Code programming

Multi-Tasking Abilities
Create and edit one program while the machine is running another

Ethernet Connectivity and USB Support
For programming and transferring of data

Automatic Depth Control
Generate blind holes reliably without operator intervention

Linear Glass Scales with 1 Micron Resolution
Provides true, closed loop, position feedback for precise part positioning accuracy

Auxiliary I/O
Ability to interface with ancillary devices such as rotary tables, indexers, and work piece handling systems

Automatic Electrode Changer
Allows for a large volume of unattended operation

Automatic Guide Changer (Optional)
Allows for a large volume of unattended operation

Integrated Rotary and Tilt/Rotary Tables (Optional)
Programmable tilt and rotary systems for complex parts requiring multi axis positioning

Break Through Detection (Optional):
Ensures a complete hole or helps to eliminate back wall strikes

Optical Inspection System (Optional)
High resolution video camera can measure hole size, verify position, and locate datum points for part programs

EDM Power Booster (Optional)
Increases the maximum average current which will reduce the cycle time when using larger diameter electrodes

Programmable High Pressure Flush (Optional)
The pressure setting for the high pressure flush through the electrode is programmed with a G-code in the part program.

TRAVEL
X Axis10.6″ (270 mm)
Y Axis11.8″ (300 mm)
W Axis20.4″ (520 mm)
Z Axis19.6″ (500 mm)
23.6″ (600 mm)••
Open Height
Minimum1.5″ (40mm)
Maximum22.0″ (560mm)
WORK TABLE
Width x Depth22.0″ x 17.5″
(560 x 445 mm)
INTERNAL WORK TANK DIMENSIONS
Width x Depth x Height***24.0″ x 22.6″ x 13.0″
(610 x 575 x 330 mm)
Maximum Water Level***11.8″ (300 mm)
WEIGHT CAPACITY
On Work Table500 lb. (225 kg.)
GENERATOR
Maximum Average Current30A
On and Off Time1 to 99 μs
Capacitors0 to 1.81 μF
AUTOMATIC ELECTRODE AND GUIDE CHANGER
AEC Positions12
AGC Positions4**, 12**
FLOOR SPACE AND WEIGHT
Width x Depth x Height32″ x 79″ x 98″ (81 cm x 201 cm x 249 cm)
Machine Tool Weight3,520 lb. {1,600 kg.)
ENVIRONMENTAL
Room Temperature68 to 77°F (20 to 25°C)
Relative Humidity40%to 55%
UTILITIES
Electrical220VAC ±10%, 3 PHASE, 60 Hz, 3.5 KVA
Air90 PSI@ 1 CFM (6 BAR@ 1.7 CMH)

* Open Height is measured from tip of a standard guide.

** Optional.

Illustrations and specifications herein are not binding in detail. Belmont Equipment & Technologies reserves the right to modify and make improvements to these specifications without notice

Programmable Flush Pressure